Varkie S110 Solids Handling Horizontal Submersible Pump - 11kW - 14.8Hp - 3~
The Varkie S110 Solids Pump supersedes the Varkie SVA110 Series, it is a horizontal submersible pump for applications where an abnormal waste product needs moving.
Models available:
Varkie S110 – Standard construction
Varkie S110X – Flameproof construction
Note:-The Varkie S110 supersedes the Varkie SVA110.
The Varkie S110 has been designed for transporting light slurries (up to an SG of 1.3) for applications where an abnormal waste product needs to be removed.
Applications, where these pumps are proving to be very successful, are:
- Mining applications (including fiery mines),
- Industrial wastewater,
- Agriculture irrigation,
- Construction site drainage,
- Large commercial and domestic water features.
This pump due to the vortex action has very good solids handling capabilities (up to 95 mm).
These units are designed to run horizontally. This allows the unit’s motor to stay partially submerged, when the pump loses prime and stops pumping, allowing the product to still cool the motor.
This model has a four-pole motor, reducing the speed and extending the wear life of the pump components.
The wet end consists of a single full vortex impeller with a volute casing and requires no adjustment.
Working Life Enhancements
Careful consideration in the design of this unit to minimise on-site maintenance by utilising sealed for life bearings, simple motor seal and a mechanical seal with a rubber bellow, protecting the seal spring from the product, which runs in an oil bath. On-site maintenance is not a recommendation, but rather use a standby unit as a backup.
Enhancements to the mechanical seal by utilising an expeller in front of the mechanical seal, keeping debris away from the seal faces, giving the part a longer working life. Pressure relief slots have also been added to the oil box to reduce the pressure on the seal. This allows the product to splash, from the expeller, through these slots onto the motor and provide a bit of extra cooling when the product level is low.
The wear plate behind the impeller is lined with polyurethane to improve the wear life.
This unit comes standard on a skid base for easy transportation in mines.
The unit can be mounted on an Amandla Float when required.
The Varkie S110X is Ex d I approved, according to SANS 60079-1 for underground use in fiery mines. All international 3-phase standard voltage ratings are available from 380 to 1000V.
Material construction ranges from standard cast iron/chrome iron and stainless steel constructions or a combination thereof. Other special materials of construction are available on request
Download Flameproof Certificate:Â Varkie S110X XPL
Click on Images to enlarge
Vakie S110 Submersible Slurry and solids pump
The S Series pumps have a horizontal configuration, which allows the pumps to stop pumping (by sucking air) when the water level gets below the top of the guard inlet (SH). This ensures cooling on the pumps motor by the product as the water level will not drop below two thirds of the pumps motor.
The unit snorts without overheating for extended periods, provided the pump is mounted or positioned horizontally.
- The S110 has a weight of 238kg.
- Solids Handling up to 90mm
- 22 metre head
- 49 lps flow
The pump is designed to work in harsh environments where large flows are not a criteria and suit municipal, mining and industrial applications and are ideal where solids in the form of sludge, slurries, suspended solids or sediment.
The Varkie S110 is available in standard and flameproof construction according to SANS 60079-1